 |
| Quantity: | |
|---|---|
Laser cutting (compressed air) requirements
The requirements of compressed air for laser cutting are: 1. No oil, 2. No water, 3. No dust. Laser cutting protection lens and focus lens for the above requirements are very high. Must be free of oil, water and dust. If there are any impurities, the light will have a direct impact on the cutting effect, and the heavy will burn the protective lens and focusing lens. According to the above requirements, the technical chief engineer has carried out technical upgrading and transformation, and completed the laser cutting combined air pressure system. Let supporting laser machine manufacturers and users use at ease, also use at ease.
High efficiency and energy saving of air compressor system
The biggest advantage of air cutting is its low cost, especially for stainless steel plate, aluminum plate, galvanized steel plate and nitrogen cutting. In some aspects, it can achieve the effect of nitrogen cutting. The perfect cutting of steel plate (2mm) can completely replace oxygen cutting, no matter from the cost or the subsequent service charge, as well as the use effect and cutting speed, The combination of air compressor system is an ideal choice for laser cutting gas, which can save at least 60% energy compared with nitrogen cost.
Perfect structure of air compressor system
Ares brand creates laser cutting all-in-one machine, professional customized host, high-efficiency motor, customized stainless steel plate heat exchange refrigeration dryer and air storage tank, five level precision filter, high filtration accuracy, stable air supply, compressed air precipitation in the air storage tank is more conducive to water discharge, low dew point, sufficient air supply, fast air supply and short time. Perfect combination of the whole layout, smooth operation of the whole machine.
Air compressor system condition requirements
The conditions of laser cutting with air are as follows: 1; 2. Meet the demand of flow rate; The minimum pressure of air cutting can not be lower than 1.3mpa. The flow rate is selected according to the power of the laser cutting machine and the size of the nozzle. The pressure of this (laser cutting combined air pressure system) developed by Guangyu is 1.6Mpa to meet the selection of laser cutting machine manufacturers and customers. This system covers the laser industry in an all-round way.
Laser cutting (compressed air) requirements
The requirements of compressed air for laser cutting are: 1. No oil, 2. No water, 3. No dust. Laser cutting protection lens and focus lens for the above requirements are very high. Must be free of oil, water and dust. If there are any impurities, the light will have a direct impact on the cutting effect, and the heavy will burn the protective lens and focusing lens. According to the above requirements, the technical chief engineer has carried out technical upgrading and transformation, and completed the laser cutting combined air pressure system. Let supporting laser machine manufacturers and users use at ease, also use at ease.
High efficiency and energy saving of air compressor system
The biggest advantage of air cutting is its low cost, especially for stainless steel plate, aluminum plate, galvanized steel plate and nitrogen cutting. In some aspects, it can achieve the effect of nitrogen cutting. The perfect cutting of steel plate (2mm) can completely replace oxygen cutting, no matter from the cost or the subsequent service charge, as well as the use effect and cutting speed, The combination of air compressor system is an ideal choice for laser cutting gas, which can save at least 60% energy compared with nitrogen cost.
Perfect structure of air compressor system
Ares brand creates laser cutting all-in-one machine, professional customized host, high-efficiency motor, customized stainless steel plate heat exchange refrigeration dryer and air storage tank, five level precision filter, high filtration accuracy, stable air supply, compressed air precipitation in the air storage tank is more conducive to water discharge, low dew point, sufficient air supply, fast air supply and short time. Perfect combination of the whole layout, smooth operation of the whole machine.
Air compressor system condition requirements
The conditions of laser cutting with air are as follows: 1; 2. Meet the demand of flow rate; The minimum pressure of air cutting can not be lower than 1.3mpa. The flow rate is selected according to the power of the laser cutting machine and the size of the nozzle. The pressure of this (laser cutting combined air pressure system) developed by Guangyu is 1.6Mpa to meet the selection of laser cutting machine manufacturers and customers. This system covers the laser industry in an all-round way.
