 |
loading
|
Product Introduction
In the cutting application, the focused spot has a great influence on the quality of the cut. The core of the single-mode laser is relatively thin, the beam quality is better than that of the multi-mode laser, the energy distribution is Gaussian, the intermediate energy density is higher, and the three-dimensional diagram is a sharp circular peak. So the advantages of single mold in thin plate.
|
Product Display
RFL-C1000S-CE
RFL-C1500S-CE
RFL-C2000S-CE
RFL-C3000S-CE
RFL-C4000S-CE
RFL-C6000S-CE
RFL-C8000S-CE
RFL-C12000S-CE
|
Technical Parameter
| MODEL | RFL-C1000S-CE | RFL-C1500S-CE | RFL-C2000S-CE | RFL-C3000S-CE | RFL-C4000S-CE | RFL-C6000S-CE | RFL-C8000S-CE | RFL-C12000S-CE |
| Optical characteristic | ||||||||
| Rated output power(w) | 1000 | 1500 | 2000 | 3000 | 4000 | 6000 | 8000 | 12000 |
| Central wavelength(nm) | 1080±5 | |||||||
| Operation mode | Continuous/modulation | |||||||
| Modulation frequency(Hz) | 1~5000 | 1~20000 | 1~5000 | |||||
| Output power stability(%) | ±1.5% | |||||||
| Red light power | 0.5~1 | 1.5 | 0.5~1 | |||||
| Output characteristic | ||||||||
| Output connector | QBH(customizable) | IQB(customizable) | QBH(customizable) | |||||
| Beam quality(BPP) | <1.5 | 1.5~2(50μm) | 1.7~2.5(50μm) | 2.7~3.1(75μm) | 3~4(100μm) | |||
| Fiber core diameter(μm) | 25(customizable) | 50(customizable) | 50(75/100/200) | 75(75/100/200) | 100(50/75/200) | |||
| Polarization state | Random | |||||||
| Output fiber length(m) | 20(customizable) | |||||||
| Electronic control characteristic | ||||||||
| Input power supply(VDC) | 220±10%V AC、50/60Hz | Three-phasefour wire system 380±10%V AC | ||||||
| Control mode | RS232/AD/Ethernet | |||||||
| Power regulation range(%) | 10~100 | |||||||
| Other characteristics | ||||||||
| Size of machine(mm)W*H*D | 440*586*149 | 485*172*727 | 485*172*802 | 560*1344*1157 | ||||
| Weight of machine(kg) | <25 | <28 | <55 | <80 | <250 | <280 | ||
| Cooling mode | water-cooling | |||||||
| Operating temperature | 10~40 | |||||||
|
Product Introduction
In the cutting application, the focused spot has a great influence on the quality of the cut. The core of the single-mode laser is relatively thin, the beam quality is better than that of the multi-mode laser, the energy distribution is Gaussian, the intermediate energy density is higher, and the three-dimensional diagram is a sharp circular peak. So the advantages of single mold in thin plate.
|
Product Display
RFL-C1000S-CE
RFL-C1500S-CE
RFL-C2000S-CE
RFL-C3000S-CE
RFL-C4000S-CE
RFL-C6000S-CE
RFL-C8000S-CE
RFL-C12000S-CE
|
Technical Parameter
| MODEL | RFL-C1000S-CE | RFL-C1500S-CE | RFL-C2000S-CE | RFL-C3000S-CE | RFL-C4000S-CE | RFL-C6000S-CE | RFL-C8000S-CE | RFL-C12000S-CE |
| Optical characteristic | ||||||||
| Rated output power(w) | 1000 | 1500 | 2000 | 3000 | 4000 | 6000 | 8000 | 12000 |
| Central wavelength(nm) | 1080±5 | |||||||
| Operation mode | Continuous/modulation | |||||||
| Modulation frequency(Hz) | 1~5000 | 1~20000 | 1~5000 | |||||
| Output power stability(%) | ±1.5% | |||||||
| Red light power | 0.5~1 | 1.5 | 0.5~1 | |||||
| Output characteristic | ||||||||
| Output connector | QBH(customizable) | IQB(customizable) | QBH(customizable) | |||||
| Beam quality(BPP) | <1.5 | 1.5~2(50μm) | 1.7~2.5(50μm) | 2.7~3.1(75μm) | 3~4(100μm) | |||
| Fiber core diameter(μm) | 25(customizable) | 50(customizable) | 50(75/100/200) | 75(75/100/200) | 100(50/75/200) | |||
| Polarization state | Random | |||||||
| Output fiber length(m) | 20(customizable) | |||||||
| Electronic control characteristic | ||||||||
| Input power supply(VDC) | 220±10%V AC、50/60Hz | Three-phasefour wire system 380±10%V AC | ||||||
| Control mode | RS232/AD/Ethernet | |||||||
| Power regulation range(%) | 10~100 | |||||||
| Other characteristics | ||||||||
| Size of machine(mm)W*H*D | 440*586*149 | 485*172*727 | 485*172*802 | 560*1344*1157 | ||||
| Weight of machine(kg) | <25 | <28 | <55 | <80 | <250 | <280 | ||
| Cooling mode | water-cooling | |||||||
| Operating temperature | 10~40 | |||||||
